Mono-crystalline |
|
22.3% |
|
3.2mm low-iron tempered suede glass |
|
2279x1134x35mm |
|
Mono 182*182mm |
|
144(6x24) |
|
28.6kg±3% |
|
30years |
|
IP68 ,Rated |
●The 550W solar panel uses high light transmission tempered glass with anti-reflective properties for greater light collection capacity. It is more durable to extreme environments and can resist corrosion such as salt spray and ammonia gas. Mature technology and scientific and reasonable testing process ensure the quality of the product, which has a higher cost performance compared to the same type of modules.
●The electrical design has been continuously optimised and improved, with lower resistance, low current loss and guaranteed photoelectric conversion rate. There is resistance to hot spots, a wider operating temperature range and a longer service life. The low decay rate is one of its outstanding performances, with a {{0}}year product warranty and a 30-year service life with an annual decay rate as low as 0.45%.
●The 550W monocrystalline solar panel has a superb power generation efficiency of 22.3%. The design of multiple main grid lines is one of the guarantees of its high power, and the latest cutting technology ensures that the cells are cut intact and there will be no hidden cracks resulting in reduced efficiency. Its BOS is the basis to ensure the efficient and stable power generation of the modules. Our relevant accessories are tested for product performance and highly sealed to enable the modules to maintain efficient and stable power generation for a long time.
550Wp |
|
41.65V |
|
13.21A |
|
Open-Circuit Voltage (Voc) |
49.60V |
Short-Circuit Current (lsc) |
14.00A |
0~+5W |
|
-0.350% degree |
|
-0.275% degree |
|
+0.045% degree |
|
lrradiance 1000W/㎡, Cell Temperature 25 degree , Spectra at AW1.5G |
416Wp |
|
39.43V |
|
10.55A |
|
Open-Circuit Voltage (Voc) |
46.68V |
Short-Circuit Current (lsc) |
11.17A |
1500V DC(IEC) |
|
-40 degree ~+85 degree |
|
25A |
|
3600Pa, 1.5 |
|
1600Pa, 1.5 |
|
lrradiance 800W/㎡, Ambient Temperature 20 degree , Winds peed 1m/s ,AW1.5G |
In the second stage, the solar cells are assembled into a solar module. The cells are cleaned and coated with an anti-reflective coating to enhance their efficiency. The cells are then arranged in a specific pattern and soldered together to form the solar panel. The panel is then sealed with a backsheet to protect it from environmental factors.
Jingsun solar panel production process adheres to strict quality standards to ensure that customers receive high-quality and durable solar panels. The company's commitment to quality has enabled it to establish itself as a leading manufacturer of solar panels.
●Solar power is used in an extremely wide range of applications, not only for domestic use, but also for national power stations, satellites and other areas. Theoretically, 1/3 of the Saharan sand could be used for solar panels to supply all of mankind's electricity needs, but this is of course impractical. The best way to do this is to lay out solar power stations on a distributed basis, and Jingsun Solar is committed to putting green renewable energy on the map all over the world.
●Humanity can be freed from dependence on non-renewable resources and, from an environmental point of view, there is almost zero pollution, apart from that caused by production and transport. Of course these pollutions are minimal compared to the use of non-renewable energy sources, and at the end of their useful life, the relevant components can be recycled.




Q:How many KW-h of electricity can a solar panel generate in a day?

Debra Towle 2017-04-09 06:10:23

Brian Gibson 2017-08-23 14:15:03
Their service is very systematic and comprehensive, and it can be seen that they pay great attention to the actual needs of their customers. We also hope to be a long-term partner!

Denise Wilson 2019-03-23 16:15:13

Lucia Jakubowski 2020-11-22 10:47:08
تگ های محبوب: 550w mono solar panel, China 550w mono solar panel manufacturers, suppliers, factory